BASIC MECHANICAL ENGINEERING LABORATORY


The Basic Mechanical Engineering laboratory has models of various boilers, boiler mountings & accessories, internal combustion and external combustion engines. By studying of these models first year students of all branches get a first hand knowledge of working of these equipment /machine whose theory of operation they learn in classroom.

Major Equipment Available:
Model of Four Stroke Petrol Engine Model.
Model of Four Stroke Diesel Engine Model.
Model of Two Stroke Petrol Engine Model.
Model of Two Stroke Diesel Engine Model.
Models of Lancashire Boiler.
Models of Locomotive Boiler.
Model of D-Slide Valve.
Model of Babcock And Wilcox Boiler.
Model of Compound Steam Engine.
Model of Cochran Boiler.
Model of Green Economiser.
Model of Combined High Steam and Low Water Safety Valve.
Model of Super Heater.
Working of Operation of Steam Piston.

MANUFACTURING PRACTICE


In Workshop first year student of all branches learn about various metals cutting operations by use of various machine tools like lathe, milling, shaping and drilling machine. In addition they also learn to make small items in foundry, black smithy, carpentry, fitting and welding shops. These activities provide student practical knowledge and experience about various production processes used in the industry.

Major Equipment Available:
Lathe Machine
Milling Machine
Grinding Machine
Drilling Machine
Shaper Machine
Power Hacksaw

STRENGTH OF MATERIALS LABORATORY/ MATERIAL TECHNOLOGY


This is second year subject of mechanical Engineering. In this subject, students study about properties of material like elasticity, plasticity, strength, ductility, toughness, brittleness and hardness. From such studies students acquire knowledge about usefulness and suitability of materials for various applications.

Major Equipment Available:
Universal Testing Machine
Brinel Hardness Testing Machine
Rockwell hardness Testing Machine
Impact Testing Machine
Compression testing machine

METAL CUTTING AND MANUFACTURING PROCESS


This is third year subject of mechanical Engineering. In this subject, students study about various cutting and manufacturing tools. From such studies students acquire knowledge about various machines and equipments of manufacturing process.

Major Equipment Available:
Lathe Machine
Milling Machine
Grinding Machine
Drilling Machine
Shaper Machine
Power Hacksaw

THERMAL ENGINEERING & GAS DYNAMICS


In this subject students of the third semester (mechanical engineering) learn about basic thermodynamic laws, air standard cycles like Otto cycle, diesel cycle, dual cycle, Brayton cycle and application of this cycles on petrol and diesel engines. They also learn and understand properties of steam and how these properties are use in calculating the useful work done by steam in various operations.

Major Equipment Available:
Separating Calorimeter
Throttling Calorimeter
Model of Babcock and Wilcox Boiler
Model of Green Economiser
Model of Combined High Stream and Low water safety valve
Model of Super Heater
Model of Steam Power Plant

THEORY OF MACHINE


In this laboratory students study various mechanisms. The combination and assembly of these mechanisms build a machine. The student learn and understand the underlying principles and motions of there components and there interdependence with the component

Major Equipment Available:
Cam & Follower
Kinematics Links
Gyroscope
Flywheel

FLUID LABORATORY/ MECHANICAL MEASUREMENT


In the Fluid Mechanics laboratory 4th semester mechanical engineering student learn how to measure the various properties of the fluids (especially of water) as well as various principles of fluids. Their measurements help the students to understand how to design various machines such as hydraulic turbine, Fluid coupling, ships, aircrafts, dam’s irrigation channels etc.

Major Equipment Available:
Notch Tank Apparatus
Calibration of Venturimeter & Orifice Meter
Minor Frictional Losses in Pipe Apparatus
Impact of Jet Van Apparatus
Bernoulli’s Apparatus
Combined Orifice & Mouth Pieces Apparatus
Reynolds Apparatus

DYNAMICS OF MACHINE LABORATORY


In This laboratory the 7th semester student learn about the relationship between dynamic balancing, vibration and noise production and transportation machinery. The students study governor (speed control), gyroscope (direction control) and vibration of shafts in different loading conditions, flywheel and technique of balance all forces of bodies in moving in condition.

Major Equipment Available:
Motorised Gyroscopic Apparatus
Universal Governor Apparatus
Static And Dynamic Balancsing Apparatus
Cam Analysis Unit
Whirling And Shaft Apparatus
Universal Vibration Apparatus

DESIGN OF MACHINE ELEMENT/ MACHINE DESIGN & CAD LABORATORY


In this laboratory student learn use of computers and various dedicated software like Catia, Pro E, and AutoCAD for designing of various components used in the manufacturing of machines.

Major Software Available:
Autocad 2013

TURBOMACHINERY LABORATORY


In turbo-machinery labs, students study the working model of various turbines and compressors to understand the method of working of the equipment. Various testing rigs available are as follows.

Major Equipment Available:

Pelton turbine test rig.
Kaplan turbine test rig.
Francis turbine test rig.

I. C ENGINE LABORATORY


This is an engine testing and tear-down facility for use with the departmental internal combustion engines course. 3rd Year Students are able to test the performance of engines (e.g. obtaining power curves, fuel consumption and efficiency) and study the cut section model of engines to determine the factions of various components. Students study engines running on gasoline, diesel, propane and alternative fuels, and evaluate the relative benefits and of each with regard to power, efficiency and cost.

Major Equipment Available:

. Cut section of Twin Cylinder 4-s Diesel Engine
. Cut section of 4 Cylinder 4-s Petrol Engine
. Cut section of 4- Cylinder 4-s Diesel Engine
. Cut section of Single Cylinder 4-s Petrol Engine
. Carburetors

HEAT & MASS TRANSFER LABORATORY


In this subject students learn about various modes of heat transfer in one dimension and also in steady state condition. They also get detail knowledge of heat exchangers for heat transfer from hot fluid to cold fluid and vice versa.

Major Equipment Available:
. Emmissivity Measurement Apparatus
. Thermal Conductivity of Liquid Apparatus
. Forced Convection Apparatus
. Natural Convection Apparatus
. Parallel /Counter Flow Heat Exchanger
. Stefen-Boltzman Apparatus
. Thermal Conductivity of A Composite Wall
. Pin-Fin Apparatus
. Guarded Hot Palte Apparatus
. Metal Bar Apparatus

AUTOMOBILE LABORATORY


Automobile is a final year subject of mechanical Engg in these subject students study how a self propelled body run in surface. They do detail study of automobile Layout, Analysis of chassis frame, steering system, suspension system, transmission system, auxiliary systems used in automobile. Students are also aware about the new innovations in automobile sector

Major Equipment Available:

. Shock Absorber
. Mechanical Brake
. Hydraulic Brake
. Synchronic Mesh Gear Box
. Disc Brake
. Centrifugal Clutch
. Differetial Mechanism
. Cut Section Of Maruti -800
. Steering Model (Rack And Pinion Type)
. Mac Pherson Type Suspension System
. Wish Bone Type Suspension System
. Leaf Spring Type Suspension System Rear

MECHANICAL VIBRATION
Admin

Mechanical Vibration is a third year subject of mechanical Engg in this subject students study how vibrations impact on the system. They do detail study of mechanical Vibrations

REFRIGERATION & AIR CONDITIONING LABORATORY


Students in 4th semester experiment with test rigs of air conditioners and refrigerators. The laboratory has (a) refrigeration test rig (b) air conditioning test rig and (c) electro-lux vapour absorption test rig. These types of test rigs are only available at the manufacturer’s premises. The manufacture and sale of refrigerators and air conditioners are an active and vibrant industrial activity and a large number of industries are associated with it. By working with these test rigs the students learns the practical use of the principles and practice of refrigeration, what are the various components used in manufacture of these machines and how they are assembled together as well their operation and maintenance.

Major Equipment Available:

. Refrigeration Test Rig.
. Air Conditioning Test Rig.
. Electro Lux Vapour Absorption Test Rig.

COMPUTER AIDED ENGINEERING/COMPUTER INTEGRATED MANUFACTURING


Computer Integrated Manufacturing (CIM) embodies three components essential to the implementation of flexible design & manufacturing - the means for information storage, retrieval, manipulation and presentation; the mechanisms by which to sense state, and modify substance; and the methodologies by which to unite them.
These modern methods are based upon the emerging technologies of computer-integrated manufacturing (CIM) and flexible manufacturing (FMS). They allow for faster development of new and improved products of high quality, shorter development and production cycles, faster delivery times, reduced production costs, and the ability to compete with the ever-changing demands of the international markets.

PRODUCTION PROCESS & CNC LABORATORY


This is a third year subject of mechanical Engineering, also it is a basic subject of production Engg in this subject students learn about various production process from CNC (Computer Numerical Control) Like milling, drilling, shaping, boring, taping, cutting. They also do detail study, how to make job through CNC machine. They study G codes and M codes for programming of CNC machine.

Major Equipment Available:

. Lathe Machine
. Milling Machine
. Grinding Machine
. Drilling Machine
. Shaper Machine
. Power Hacksaw